News
ATA Truck Tonnage Index Increased 2.7% in May PDF Print Email
Friday, June 24, 2016 07:55 AM

ATA Truck Tonnage Index Increased 2.7% in May 

ARLINGTON, VA –  American Trucking Associations' advanced seasonally adjusted (SA) For-Hire Truck Tonnage Index increased 2.7% in May, following a revised 1.7% drop during April. In May, the index equaled 139 (2000=100), up from 135.3 in April. The all-time high was 144 in February. 

"Following two consecutive decreases totaling 6 percent, May was a nice increase in truck tonnage," said ATA Chief Economist Bob Costello. "Better consumer spending in April and May certainly helped, but economic growth remains mixed and I'd expect the recent choppy pattern in tonnage to continue for the next quarter or two.

"We recently received good news on the inventory cycle, with the total business inventory-to-sales ratio declining for the first time in nearly a year. While one month doesn't make a trend, this was good news for the trucking industry," he said.

Trucking serves as a barometer of the U.S. economy, representing 68.8% of tonnage carried by all modes of domestic freight transportation, including manufactured and retail goods. Trucks hauled just under 10 billion tons of freight in 2014. Motor carriers collected $700.4 billion, or 80.3% of total revenue earned by all transport modes.

For more information visit trucking.org.

 
Carter Fuel Systems Introduces 13 New Part Numbers PDF Print Email
Friday, June 10, 2016 02:25 PM

Carter Fuel Systems Introduces 13 New Part Numbers

LOGANSPORT, IN – Carter Fuel Systems, a U.S.-based manufacturer of complete fuel system solutions, has announced the introduction of 13 new part numbers covering a series of model year applications ranging from 2001-14.

Extending coverage to reach 2.7 million additional passenger vehicles, the new part numbers include eight fuel pump module assemblies, three fuel tank sender assemblies, one fuel pump reservoir and one gasoline direct injection (GDI) mechanical fuel pump.

The new part numbers fit popular models such as the Chevrolet Equinox, GMC Terrain, Buick LaCrosse, Mazda CX-5, Chevrolet Silverado, GMC Sierra and Chevrolet Malibu.

Covering a variety of applications including domestic, import, diesel, marine and performance, Carter Fuel Systems has been supplying automotive aftermarket fuel systems for more than 100 years. Carter manufactures a broad line of fuel pumps and accessories, including first and second generation mechanical fuel pumps, electric fuel pumps and pump kits, module assemblies, original equipment (OE) replacement parts and supporting equipment.

For more information, visit carterfuelsystems.com.

 
Gates Corporation Releases 255 New Automotive Aftermarket Parts PDF Print Email
Friday, June 10, 2016 02:19 PM

Gates Corporation Releases 255 New Automotive Aftermarket Parts

DENVER, COGates Corporation, a global diversified manufacturer of industrial, automotive, and heavy-duty aftermarket products, announced the addition of 255 new part numbers to its Original Equipment (OE) quality automotive products line.

The product release includes six new heavy-duty water pumps for popular truck applications.  The pumps are built using upgraded seals and bearings to handle heavy diesel loads, while precise face machining ensures a correct fit. 

Gates adds a new size of Fiber Braid Lock-On Hose (5LOC) which is now available in 300 ft. bulk reel and 50 ft. packaging.  This fiber braid reinforced hose is ideal for petroleum-based hydraulic oils, glycol antifreeze compounds, water, engine lubricating oils and air.  It has an oil and mildew resistant cover, a 300-psi working pressure and meets specific performance requirements for fuel and B20 biodiesel fuel transfer applications up to 125 degrees Fahrenheit.

The product release includes a new line of Variable Valve Timing Solenoids that effectively restore the variable valve timing to proper operation and performance.  The OE quality parts provide exact fit, easy installation and a practical solution to the failed operation of a VVT Solenoid, which prevents oil flow and pressure to an engine’s cam phaser.

Gates expands its RPM (Race, Performance, Muscle) line with 22 new RPM Micro-V® belts for many popular supercharged applications as well as a new timing belt for the 1993-1994 Nissan Maxima equipped with the 3.0L engine.  Gates RPM Micro-V belts utilize multiple adhesion gum layers and nylon reinforcement in a patented EPDM compound, resisting heat and extending service life. The RPM timing belts use superior materials such as high-strength tensile cords, aramid reinforced rubber compound and tough tooth fabric. They have shown to be stronger, last longer and less susceptible to damage from heat and contamination compared to the original equipment and competitive timing belts.

For more detailed information about new and existing Gates automotive aftermarket products, visit Gates.com/automotive

 

 
Cautionary Flags for USA Trucking Aftermarket PDF Print Email
Friday, June 10, 2016 01:42 PM

Cautionary Flags for USA Trucking Aftermarket
New Truck Sales Down, Tonnage Down, Used Truck Prices Down

Although some indicators are trending towards good news for truck service and parts, a key ATA (American Trucking Association) indicator for health of the over-the-road truck aftermarket is sending signal for caution. 

In its May 24 release the American Trucking Associations’ seasonally adjusted (SA) For-Hire Truck Tonnage decreased 2.1% from April, following a 4.4% drop During March. In April, the index equaled 134.8, down from 137.6 in March. The all-time high was 144 in February. 

“After having an abnormally large seasonally adjusted gain in February, tonnage fell in April, in addition to the large drop in March, “said ATA Chief Economist Bob Costello. “There is still an inventory correction transpiring throughout the supply chain that will keep a lid on truck freight volumes in the near term. As a result, we are likely still to experience lackluster tonnage numbers in the next few months.” 

ATA estimates the number of Class 8 trucks used for business purposes, excluding government and farm, around 2.4 million.

Diesel Progress Magazine reported that Class 8 truck production is expected to drop to 75% of the 320,000 build in 2015 which was considered strong. It says that the 25% drop is in response to declining freight demand and freight rates along with “the highest used truck inventory in 15 years.”

According to NADA Used Car Guide commercial truck analyst, Chris Visser, "As in the auction and wholesale lanes, depreciation in the retail channel moderated going into the second quarter. Three to five-year old sleeper tractors lost about 3 percent of their value from February to March, and we estimate another similar loss from March to April."

Visser went on to say, "High-volume 2011 to 2013 model year trucks lost approximately 5 percent of their value from February to March. We also predict a similar drop from March to April. Retail pricing continues to decrease, and perhaps as a result, buyers are entering the market in incrementally greater numbers."

Falling used truck prices may bring some buyers into the market. However, in recent down turns in shipping, NARSA members reported that their customers were parking tractors rather than replacing them. The ATA says that 67% of U.S. freight by weight moves by truck.

 

 
Hilco Industrial - Webcast Auction PDF Print Email
Tuesday, June 07, 2016 02:13 PM

Radiator & Heat Exchanger Manufacturing Equipment, Metal Fabricating, Welding & More

Hilco was appointed by the Company to assist in the sale of machinery and equipment no longer required to the ongoing operations. This Calgary, Alberta, Canada based manufacturer produced premium quality Charge Air Coolers (CAC), Charge Air Cooler Testing Equipment, Oil Coolers, Radiators, and Radiator/ Charge Air Cooler Cooling Modules for all turbo-diesel powered equipment used in Transportation, Agricultural, Industrial, and other Applications. 

The realignment of this facility offers manufacturers of heat transfer products, including large industrial radiators and heat exchangers, the opportunity to increase production or upgrade existing equipment by purchasing name brand production lines and machinery at auction prices.

Featured Items

(4) Voss Manufacturing RF-300 Aluminum Fin Machine

Voss Manufacturing Auto Tube Stuffing Machine

Charge Air Cooler/Radiator Core Builders

 

 


Test & Measurement

Taylor TD-36 Tandem Axle, 4-Roll Chassis Dynamometer

Drive-In Environmental Wind Tunnel

PV/T Inc. Cold Wall Batch Type Vacuum Furnace

 


Metal Fabrication & Machining 

Amada FBD-8025NT 80-Ton Hydraulic CNC Press Brake

Amada M-3060 6mm x 3060mm Mechanical Shear

Amada Vipros 255 20-Ton Hydraulic CNC Turret Punch

Haas VF-4 CNC Vertical Machining Center

 


Welding

(9) Lincoln Precision
275 TIG Welders

(9) Lincoln Invertec V350
Pro Welders

(9) Lincoln Cobramatic 
Wire Feeders

 

 

Learn More: https://www.hilcoind.com/sale/heatexchange

Hilco Industrial is a worldwide leader in buying and selling industrial machinery and equipment. The primary source for machinery buyers looking for great deals. 

 

 
<< first < Prev 1 2 3 4 5 6 7 8 9 Next > last >>

Page 7 of 9